JetKernel Inbuilt driver zImage.

JetKernel testing releases will be posted here by the DevTeam. This forum is open for feedback from test users.
Forum rules
Dev Team members can post testing releases here. Please give a link to the source base that was used for a release or post patches / changelogs along with your binary packages.

Registered users can reply with their test feedback. Please only post test feedback here. For general (e.g. install related questions) please use the support Q&A section.

JetKernel Inbuilt driver zImage.

Postby MadRocker » Tue Aug 02, 2011 5:00 am

Here is a alternative JetKernel "experimental-2.6.29-MadRocker" with the jetmodules inbuilt into the zImage so no need for extra modules except maybe dhd.ko.

The purpose is to test the video and see if it is more responsive than the s3c*g2d.ko ... modules.
Wallpaper chooser seems more responsive, even with horrible ../egl + ../hw files so should be much better with nice ../egl ../hw files. Using latest openfimg g2d /g3d drivers.

It does not have MAX9880 or xsr or rfs or dpram param as there is some issues that needs working on.
Wlan / dhd is inbuilt but not sure if it is any good for now so you might need to force dhd.ko .

Please check the kernel.log there is some extra output depending on the android for Jet that you are using.

Included in the zip file is good modules that seems to help get extra output or makes new features active.
First test with only dhd.ko in the modules folder then 2nd time add this modules folder + dhd.ko and note the difference.

http://code.google.com/p/mad-rocker-s80 ... z&can=2&q=

# = not there, no # = it is there in the zImage.
Code: Select all
obj-$(CONFIG_BT_GPIO)      += btgpio/
obj-$(CONFIG_CMM)      += cmm/
obj-$(CONFIG_DPRAM)      += dpram/
#obj-$(CONFIG_DPRAM_RECOVERY)      += dpram_recovery/
obj-$(CONFIG_G2D)      += g2d/
obj-$(CONFIG_G3D)      += g3d/
obj-$(CONFIG_JPEG)      += jpeg/
obj-$(CONFIG_MFC)      += mfc/
obj-$(CONFIG_MULTIPDP)      += multipdp/
#obj-$(CONFIG_PARAM)      += param/
obj-$(CONFIG_PP)      += pp/
#obj-$(CONFIG_RFS_FS)      += rfs/
#obj-$(CONFIG_ROTATOR)      += rotator/
obj-$(CONFIG_VIBETONZ)      += vibetonz/
obj-$(CONFIG_WLAN)      += wlan/
#obj-$(CONFIG_RFS_XSR)      += xsr/
#obj-$(CONFIG_CAMERA)      += camera/


Wimax not active in this zImage.

Code: Select all
<4>[    3.194332] [MULTIPDP] [dpram_thread] : BEGIN
<4>[    3.203069] [MULTIPDP] [dpram_open] : BEGIN
<4>[    3.211498] [MULTIPDP] [dpram_open] : filp_open() failed~!: -2
<4>[    3.228119] [MULTIPDP] [multipdp_init] : DPRAM I/O thread error


Code: Select all
<6>[    1.334566] g_serial gadget: Gadget Serial v2.4
<6>[    1.343763] g_serial gadget: g_serial ready
MadRocker
Dev Team
Dev Team
 
Posts: 528
Joined: Sun Dec 12, 2010 7:15 am

Advertisement

Re: JetKernel Inbuilt driver zImage.

Postby MadRocker » Wed Aug 03, 2011 4:15 am

Does anyone know if this http://code.google.com/p/bonsai/source/ ... 2c.h?r=471 is a better version than our fsa9480 we have ?
MadRocker
Dev Team
Dev Team
 
Posts: 528
Joined: Sun Dec 12, 2010 7:15 am


Return to JetKernel Testing

Who is online

Users browsing this forum: No registered users and 1 guest

  • Advertisement
cron