JetPlatform Eclair 2011-03-26 testing

JetPlatform (Eclair) testing releases will be posted here by the DevTeam. This forum is open for feedback from test users.
Forum rules
Dev Team members can post testing releases here. Please give a link to the source base that was used for a release or post patches / changelogs along with your binary packages.

Registered users can reply with their test feedback. Please only post test feedback here. For general (e.g. install related questions) please use the support Q&A section.

Re: JetPlatform Eclair 2011-03-26 testing

Postby karolos » Mon May 16, 2011 6:25 pm

Hello there,
I am happy to have found a working release of the JetDroid-prject after
everal flops.
Does the "no service found"-message mean that JetDroid is not intendet to be
used as cell phone system?
Greetings Karl (newbie)
karolos
Freshman
 
Posts: 2
Joined: Wed May 04, 2011 7:56 am

Advertisement

       

Re: JetPlatform Eclair 2011-03-26 testing

Postby turk32 » Fri May 20, 2011 7:06 pm

All are working fine and perfect. Specially the wi-fi and browser.
But my samsung jet gets very hot if i run the jetdroid for 10 minutes. The jetdroid is sometimes slow too, but sometime also very fast and smooth.
And the android market isn't working for me. Gapps is working fine, but the android market isn't working. And sometimes it reboots auto, when i try to start an app/game.
And the battery logo isn't working:P, it says all the time that my battery is at 0%
And the sound doens't work, it would be great if it worked.

The rest is very good.Ty for this, it's really nice, if the android market worked and if it was faster then it was perfect for me.

Btw i'm new with this but i alrdy understand evrything. i tried the android fix 5 times but it's still not working it says: A server error has occurred Retry, or cancel and return to the previous screen.
i followed http://www.jetdroid.org/forum/viewtopic.php?f=11&t=224 guide.
Btw i'm using launcherpro 0.8.6
turk32
Freshman
 
Posts: 5
Joined: Tue May 17, 2011 9:14 pm

Re: JetPlatform Eclair 2011-03-26 testing

Postby rasith777 » Tue Jun 21, 2011 7:12 am

hi JetDroid Project Members,
I have successfully Installed to the JETDROID as following all steps.
the OS working Properly than the Old one.
But it used more Battery to launch.
When Using Samsung OS,The fully charged Battery Can Run the phone about 40 hours.
But when I use the Jetdroid OS,the fully Charged battery can run only about 6-8 hours & the phone getting heat a lot :oops:
Is this a fault of my Installation?? :roll:
I'm Using a Micro SD HC Class 10 to my ext3 Partition. 8-)
Any solution please.. Thank you JetDroid guys...
Best Regards.. :)
rasith777
Freshman
 
Posts: 1
Joined: Tue Jun 21, 2011 6:52 am

Re: JetPlatform Eclair 2011-03-26 testing

Postby Carlos_Manuel » Tue Jun 21, 2011 2:39 pm

rasith777 wrote:hi JetDroid Project Members,
I have successfully Installed to the JETDROID as following all steps.
the OS working Properly than the Old one.
But it used more Battery to launch.
When Using Samsung OS,The fully charged Battery Can Run the phone about 40 hours.
But when I use the Jetdroid OS,the fully Charged battery can run only about 6-8 hours & the phone getting heat a lot :oops:
Is this a fault of my Installation?? :roll:
I'm Using a Micro SD HC Class 10 to my ext3 Partition. 8-)
Any solution please.. Thank you JetDroid guys...
Best Regards.. :)


JetDroid have fake battery...
it shows battery: 80%
and JetDroid using much more battery than Jét TouchWiz.. This is normal...
JétDroid ROMs, stuff... http://code.google.com/p/android-for-jet/
My YT Channel: http://www.youtube.com/user/CarlosJacksonHD
Github: manumanfred
XDA-Devs: Carlos_Manuel

Galaxy Nexus:
ROM: My own ROM 'Dreams', (KTU84P) KitKat 4.4.4
User avatar
Carlos_Manuel
Dev Team
Dev Team
 
Posts: 883
Joined: Tue Mar 29, 2011 11:50 am
Location: Estonia / Finland

Re: JetPlatform Eclair 2011-03-26 testing

Postby MadRocker » Thu Jun 23, 2011 3:38 am

For the battery to work we need a alternative kernel / zImage with fake battery disabled and s3c battery enabled as module then build it and before doing the kernel modules remove the s3c battery as the battery files is unhappy and build the modules.

Next use this new zImage and the s3c battery .ko I posted a long time ago and enjoy.
The battery functions might not all work properly in this eclair version as there might be some lib files missing.

02JetEclair this wants to work and has the missing files.
It should show please plug in the power cable or power cable not plugged in or something like that on the desktop.
I did get it to do this with one of my March zImages and the s3c battery .ko and insmod -fr command in init.rc .

That is as much as I have figured out so far.

Example from android.log 22march Mad zImage + s3c6410_battery.ko:
Code: Select all
E/BatteryService( 1928): acOnlinePath not found
E/BatteryService( 1928): usbOnlinePath not found
E/BatteryService( 1928): batteryStatusPath not found
E/BatteryService( 1928): batteryHealthPath not found
E/BatteryService( 1928): batteryPresentPath not found
E/BatteryService( 1928): batteryCapacityPath not found
E/BatteryService( 1928): batteryVoltagePath not found
E/BatteryService( 1928): batteryTemperaturePath not found
E/BatteryService( 1928): batteryTechnologyPath not found
I/sysproc ( 1928): Entered system_init()
MadRocker
Dev Team
Dev Team
 
Posts: 528
Joined: Sun Dec 12, 2010 7:15 am

Re: JetPlatform Eclair 2011-03-26 testing

Postby MadRocker » Thu Jun 23, 2011 6:58 am

Anyone that wants to figure this problem out /etc/sysctl.conf , here is a link.

http://android.modaco.com/content/dell- ... st-as-well
MadRocker
Dev Team
Dev Team
 
Posts: 528
Joined: Sun Dec 12, 2010 7:15 am

Re: JetPlatform Eclair 2011-03-26 testing

Postby Carlos_Manuel » Thu Jun 23, 2011 7:34 pm

Example from android.log 22march Mad zImage + s3c6410_battery.ko:


Hi MadRocker!
Where I can download your 22march Zimage?
I didn't found it! :/
JétDroid ROMs, stuff... http://code.google.com/p/android-for-jet/
My YT Channel: http://www.youtube.com/user/CarlosJacksonHD
Github: manumanfred
XDA-Devs: Carlos_Manuel

Galaxy Nexus:
ROM: My own ROM 'Dreams', (KTU84P) KitKat 4.4.4
User avatar
Carlos_Manuel
Dev Team
Dev Team
 
Posts: 883
Joined: Tue Mar 29, 2011 11:50 am
Location: Estonia / Finland

Re: JetPlatform Eclair 2011-03-26 testing

Postby MadRocker » Fri Jun 24, 2011 6:48 am

:oops: I think that was the zImage where to keylayout was bad, "click menu button and then try to click settings and search opens instead of settings".

I will test it, either 22march or 21march zImage of them has this problem.

Carlos try the 16Jun 2011 zImage in my github "test" until I can fix the 21/22march kernel.
The 16Jun date one is a old zImage form ???? somewhere so it has the fake battery in and then insmod -fr /system/lib/modules/s3c6410_battery.ko , I think this is the 24march kernel with wrong date as it has the same egl swap buffer error.

Kernel.log:
Code: Select all
<4>[    1.738095] [MAX8906]: DATE,TIME: 24.6.2011, 8:17:54
<4>[    1.751942] [MAX8906]: REG_CHG_CNTL1: 0x3F
<4>[    1.760703] [MAX8906]: REG_CHG_CNTL2: 0x64
<4>[    1.769341] [MAX8906]: REG_CHG_IRQ1: 0x2
<4>[    1.778072] [MAX8906]: REG_CHG_IRQ2: 0xC
<4>[    1.786590] [FSA9480]pm_check
<4>[    1.786605]  [FSA9480]available_PM_Set [FSA9480] found max8906
<4>[    1.812172] [MAX8906]: REG_CHG_IRQ1_MASK: 0x2
<4>[    1.820747] [MAX8906]: REG_CHG_IRQ2_MASK: 0x0
<4>[    1.829195] [MAX8906]: REG_CHG_STAT: 0x1E
<4>[    1.837699] [MAX8906]: REG_BBATTCNFG: 0x7
<6>[    1.845947] s3c_bat_init
<6>[    1.854312] instinctq-battery instinctq-battery: s3c_bat_probe


Android.log:
Code: Select all
I/SystemServer( 2055): Starting Battery Service
D/BatteryService( 2055): CHARGER :: mPlugType = 0
D/BatteryService( 2055): CHARGER :: mPlugNotification.defaults = 1
E/BatteryService( 2055): Exception is java.lang.NullPointerException
MadRocker
Dev Team
Dev Team
 
Posts: 528
Joined: Sun Dec 12, 2010 7:15 am

Re: JetPlatform Eclair 2011-03-26 testing

Postby Carlos_Manuel » Fri Jun 24, 2011 9:21 am

MadRocker wrote::oops: I think that was the zImage where to keylayout was bad, "click menu button and then try to click settings and search opens instead of settings".

I will test it, either 22march or 21march zImage of them has this problem.

Carlos try the 16Jun 2011 zImage in my github "test" until I can fix the 21/22march kernel.
The 16Jun date one is a old zImage form ???? somewhere so it has the fake battery in and then insmod -fr /system/lib/modules/s3c6410_battery.ko , I think this is the 24march kernel with wrong date as it has the same egl swap buffer error.

Kernel.log:
Code: Select all
<4>[    1.738095] [MAX8906]: DATE,TIME: 24.6.2011, 8:17:54
<4>[    1.751942] [MAX8906]: REG_CHG_CNTL1: 0x3F
<4>[    1.760703] [MAX8906]: REG_CHG_CNTL2: 0x64
<4>[    1.769341] [MAX8906]: REG_CHG_IRQ1: 0x2
<4>[    1.778072] [MAX8906]: REG_CHG_IRQ2: 0xC
<4>[    1.786590] [FSA9480]pm_check
<4>[    1.786605]  [FSA9480]available_PM_Set [FSA9480] found max8906
<4>[    1.812172] [MAX8906]: REG_CHG_IRQ1_MASK: 0x2
<4>[    1.820747] [MAX8906]: REG_CHG_IRQ2_MASK: 0x0
<4>[    1.829195] [MAX8906]: REG_CHG_STAT: 0x1E
<4>[    1.837699] [MAX8906]: REG_BBATTCNFG: 0x7
<6>[    1.845947] s3c_bat_init
<6>[    1.854312] instinctq-battery instinctq-battery: s3c_bat_probe


Android.log:
Code: Select all
I/SystemServer( 2055): Starting Battery Service
D/BatteryService( 2055): CHARGER :: mPlugType = 0
D/BatteryService( 2055): CHARGER :: mPlugNotification.defaults = 1
E/BatteryService( 2055): Exception is java.lang.NullPointerException


OK Thanks!
Right now I don't need Zimage where is fake battery disabled because I deleted s3c6410_battery.ko and I cant find it + right now I try to make Eclair much better... I found one good SDK Eclair it's works with JetDroid Eclair files... and JetDroid eclair works with this SDK eclair files... but now nothing new not work.. SDK 2.1 have google apps, some sound files what I didn't saw in other ROMS and other files.. SDK 2.1 with JetDroid eclair is not good because WiFi and sensors not work...
JétDroid ROMs, stuff... http://code.google.com/p/android-for-jet/
My YT Channel: http://www.youtube.com/user/CarlosJacksonHD
Github: manumanfred
XDA-Devs: Carlos_Manuel

Galaxy Nexus:
ROM: My own ROM 'Dreams', (KTU84P) KitKat 4.4.4
User avatar
Carlos_Manuel
Dev Team
Dev Team
 
Posts: 883
Joined: Tue Mar 29, 2011 11:50 am
Location: Estonia / Finland

Re: JetPlatform Eclair 2011-03-26 testing

Postby Gotomtom95 » Sun Jul 10, 2011 3:47 pm

Soooo... any heads up to when a new testversion may occur?
JETDROID WOOOT
User avatar
Gotomtom95
Freshman
 
Posts: 5
Joined: Thu May 05, 2011 1:49 pm

PreviousNext

Return to JetPlatform (Eclair) Testing

Who is online

Users browsing this forum: No registered users and 1 guest

  • Advertisement
cron